| SIMATIC ET 200SP, ANALOG INPUT MODULE, AI 2 X SG 4-/6-WIRE HIGH SPEED, FITS TO BU-TYPE A0, COLOR CODE CC00, CHANNEL DIAGNOSIS, 28/16BIT, +/-0,05%, FOR STRAIN GAUGE FULL BRIDGES |
| General information |
| Product type designation | AI 2xSG 4-/6-wire HS |
| HW functional status | 01 |
| Firmware version | V1.0.0 |
| FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC00 |
| Product function |
| I&M data | Yes; I&M0 to I&M3 |
| Measuring range scalable | Yes |
| Scalable measured values | No |
| Adjustment of measuring range | Yes; ±0.5 ... 320 mV/V |
| Engineering with |
| STEP 7 TIA Portal configurable/integrated as of version | V14 SP1 |
| STEP 7 configurable/integrated as of version | V5.6 |
| PROFIBUS as of GSD version/GSD revision | V03.01.105 |
| PROFINET as of GSD version/GSD revision | GSDML V2.33 |
| Operating mode |
| Oversampling | Yes; 2 channels per module |
| MSI | No |
| CiR – Configuration in RUN |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | No |
| Supply voltage |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current |
| Current consumption (rated value) | 70 mA |
| Encoder supply |
| Output voltage (DC) | 4.85 V |
| Short-circuit protection | Yes |
| Output current |
| Rated value | 60 mA; Per channel |
| Power |
| Power available from the backplane bus | 65 mW |
| Power loss |
| Power loss, typ. | 1.5 W |
| Address area |
| Address space per module |
| Address space per module, max. | 32 byte |
| Inputs | 32 byte |
| Outputs | 8 byte |
| Hardware configuration |
| Automatic encoding | |
| Mechanical coding element | Yes |
| Analog inputs |
| Number of analog inputs | 2; Differential inputs |
| Cycle time (all channels), min. | 100 µs |
| Analog input with oversampling | Yes |
| Values per cycle, max. | 14 |
| Resolution, min. | 100 µs |
| Input ranges |
| Strain gauges (full bridges) | Yes |
| Cable length |
| shielded, max. | 500 m |
| Analog value generation for the inputs |
| Measurement principle | Sigma Delta |
| Integration and conversion time/resolution per channel |
| Resolution with overrange (bit including sign), max. | 28 bit; 16 bits with oversampling |
| Integration time, parameterizable | Yes |
| Interference voltage suppression for interference frequency f1 in Hz | 60 / 50 Hz / no |
| Conversion time (per channel) | 100 µs |
| Smoothing of measured values |
| IIR low-pass filter frequency | 0.01 ... 600 Hz |
| IIR low-pass filter ordinal number | 1 ... 4 |
| Notch filter frequency | 0.1 ... 1 000 Hz |
| Notch filter quality | 5.00 ... 250.00 |
| Average value filter | 0.1 ... 655.3 ms |
| Encoder |
| Connection of signal encoders |
| For strain gauges (full bridges) with 4-conductor connection | Yes |
| For strain gauges (full bridges) with 6-conductor connection | Yes |
| Resistance of full bridge, min. | 80 Ω |
| Resistance of full bridge, max. | 5 000 Ω |
| Errors/accuracies |
| Linearity error (relative to input range), (+/-) | 0.025 % |
| Temperature error (relative to input range), (+/-) | 0.0005 %/°C; Strain gauge full bridge, 6-conductor connection |
| Temperature coefficient, zero point | ≤ ±0.25 μV/K |
| Temperature coefficient, span, 4-conductor connection (referred to end value) | ≤ ±5 ppm/K |
| Temperature coefficient, span, 6-conductor connection (referred to end value) | ≤ ±10 ppm/K |
| Basic error limit (operational limit at 25 °C) |
| Voltage, relative to input range, (+/-) | 0.05 %; See manual for details |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) | Yes |
| Filtering and processing time (TCI), min. | 87 µs |
| Bus cycle time (TDP), min. | 125 µs |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Limit value alarm | Yes; two upper and two lower limit values in each case |
| Diagnostic messages |
| Monitoring the supply voltage | Yes |
| Wire-break | Yes |
| Short-circuit | Yes |
| Group error | Yes |
| Overflow/underflow | Yes |
| Diagnostics indication LED |
| Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| Channel status display | Yes; Green LED |
| for channel diagnostics | Yes; Red LED |
| for module diagnostics | Yes; green/red DIAG LED |
| Potential separation |
| Potential separation channels |
| between the channels | No |
| between the channels and backplane bus | Yes |
| between the channels and the power supply of the electronics | Yes |
| Isolation |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions |
| Ambient temperature during operation |
| horizontal installation, min. | -25 °C |
| horizontal installation, max. | 60 °C |
| vertical installation, min. | -25 °C |
| vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level |
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax – 1 K/100 m) at 795 hPa ... 701 hPa (+2 000 m ... +3 000 m) |
| Dimensions |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weights |
| Weight, approx. | 45 g |
| last modified: | 03/13/2019 |
