| Product type designation | CP 5614 A2 |
| Communications processor CP 5614 A2, PCI card with master and slave connection to PB; incl. DP-Base software, Configuring tool: DP-RAM Interface for DP master incl. PG and FDL protocol, Single License for 1 installation, Runtime software, Class A; software and electr. manual on CD-ROM, 2 languages (de, en) ; Operating system support see SIMATIC NET software only for old applications, as of Windows 7 CP 5614 A3 is recommended 6GK1561-4AA02 |
| Transmission rate |
| Transfer rate | |
| at the 1st interface / acc. to PROFIBUS | 9.6 kbit/s ... 12 Mbit/s |
| at the 2nd interface / acc. to PROFIBUS | 9.6 kbit/s ... 12 Mbit/s |
| Interfaces |
| Number of electrical connections | |
| at the 1st interface / acc. to PROFIBUS | 1 |
| at the 2nd interface / acc. to PROFIBUS | 1 |
| Type of electrical connection | |
| at the 1st interface / acc. to PROFIBUS | 9-pin Sub-D socket (RS 485) |
| at the 2nd interface / acc. to PROFIBUS | 9-pin Sub-D socket (RS 485) |
| Supply voltage, current consumption, power loss |
| Type of voltage / of the supply voltage | DC |
| Supply voltage | |
| 1 / from backplane bus | 5 V |
| Relative symmetrical tolerance / at DC | |
| at 5 V | 5 % |
| Consumed current | |
| 1 / from backplane bus / at DC / maximum | 0.9 A |
| Power loss [W] | 4.5 W |
| Permitted ambient conditions |
| Ambient temperature | |
| during operation | 5 ... 50 °C |
| during storage | -40 ... +70 °C |
| during transport | -40 ... +70 °C |
| Relative humidity / at 25 °C / without condensation / during operation / maximum | 85 % |
| Protection class IP | IP00 |
| Design, dimensions and weight |
| Module format | PCI |
| Width | 18 mm |
| Height | 107 mm |
| Depth | 168 mm |
| Net weight | 120 g |
| Number of plug-in cards of same design / plug-in / per PC station | 4 |
| Number of units / Note | FMS-5613 supports up to two CP 5603 / CP 5613 A2 / CP 5614 A2 / CP 5623 / CP 5624 processors |
| Performance data |
| Performance data / open communication |
| Software / for open communication / by means of SEND/RECEIVE / required | FDL driver included in scope of delivery of the CP |
| Number of possible connections / for open communication / by means of SEND/RECEIVE / maximum | 80 |
| Performance data / PROFIBUS DP |
| Software / for DP master function / required | No |
| Service / as DP master | |
| DPV0 | Yes |
| DPV1 | Yes |
| DPV2 | Yes |
| Number of DP slaves / on DP master / usable | 124 |
| Amount of data | |
| of the address area of the inputs / as DP master / total | 30256 byte |
| of the address area of the outputs / as DP master / total | 30256 byte |
| of the address area of the inputs / per DP slave | 244 byte |
| of the address area of the outputs / per DP slave | 244 byte |
| of the address area of the diagnostic data / per DP slave | 244 byte |
| Software / for DP slave function / required | No |
| Service / as DP slave | |
| DPV0 | Yes |
| DPV1 | Yes |
| Amount of data | |
| of the address area of the inputs / as DP slave / total | 244 byte |
| of the address area of the outputs / as DP slave / total | 244 byte |
| Performance data / FMS functions |
| Software / for FMS communication / required | Yes, FMS-5613 |
| Number of possible connections / for FMS connection / maximum | 40 |
| Performance data / S7 communication |
| Software / for S7 communication / required | Yes, HARDNET-PB S7 (S7-5613) |
| Number of possible connections / for S7/PG communication / maximum | 50 |
| Performance data / multi-protocol mode |
| Number of active connections / with multi-protocol mode | 50 |
| Number of configurable connections / per PC station | 207 |
| Product functions / management, configuration |
| Configuration software / required | Included in scope of supply |
| Product functions / Diagnosis |
| Product function | |
| Port diagnostics | Yes |
| Standards, specifications, approvals |
| Standard | |
| for EMC | 89/336/EEC |
| for safety / from CSA and UL | CAN/CSA C22.2 & UL 60950-1, UL 1950 |
| for emitted interference | EN 50081-1, EN 50081-2 |
| for interference immunity | EN 50082-1, EN 50082-2 |
| Certificate of suitability | |
| CE marking | Yes |
| C-Tick | Yes |
