| Active field distributor AFD8 for PROFIBUS PA for foundation Fieldbus H1, 8 short circuit-proof spur lines with bounce protection logic Automatic bus termination for line and ring topology for extended temperature range Degree of protection IP66 |
General information |
Product type designation | Active Field Distributor AFD8 |
HW functional status | 01 |
Product function |
Repeater function | No |
Supply voltage |
permissible range, lower limit (DC) | 16 V |
permissible range, upper limit (DC) | 32 V |
Reverse polarity protection | Yes; only in conjunction with FDC 157 |
Overvoltage protection | No |
Input current |
Current consumption (in no-load operation), typ. | 34 mA; 64 mA at the end of the cable |
Current consumption, max. | 514 mA |
Power loss |
Power loss, typ. | 544 mW |
Power loss, max. | 4.1 W |
Interfaces |
PROFIBUS PA |
Transmission rate, max. | 31.25 kbit/s |
Number of connectable PA field devices | 8 |
Current output to PA field devices, max. | 480 mA |
permissible current per spur line | 60 mA |
Protocols |
PROFIBUS DP | No |
PROFIBUS PA | Yes |
AS-Interface | No |
FOUNDATION Fieldbus H1 | Yes |
Interrupts/diagnostics/status information |
Status indicator | Yes |
Alarms | No |
Diagnostics function | Yes |
Diagnostics indication LED |
Main line status | Yes |
Main line failure | Yes |
Spur line status/fault | Yes |
automatic bus termination | Yes |
Potential separation |
between main line and spur lines | No |
Degree and class of protection |
Degree of protection acc. to EN 60529 | |
IP66 | Yes |
Standards, approvals, certificates |
Use in hazardous areas |
ATEX Zone 1 | No |
ATEX Zone 21 | No |
ATEX Zone 2 | Yes |
ATEX Zone 22 | Yes |
FM Class I Zone 1 | No |
FM Class I Zone 2, Division 2 | Yes |
Ambient conditions |
Ambient temperature during operation |
min. | -40 °C |
max. | 70 °C |
Ambient temperature during storage/transportation |
min. | -40 °C |
max. | 85 °C |
Relative humidity |
Operation, max. | 95 % |
Connection method |
Main line |
Number of main lines | 2 |
Design of terminals | Screw terminal block |
Type of connection (enclosure cable gland) | M16 |
Type of cable | Type A |
Cable diameter, min. | 4 mm |
Cable diameter, max. | 9 mm |
Conductor cross-section, min. | 0.2 mm² |
Conductor cross-section, max. | 2.5 mm² |
automatic bus termination | Yes |
permissible main line current | 1 A |
Spur line |
Number of spur lines | 8 |
Design of terminals | Screw terminal block |
Type of connection (enclosure cable gland) | M16 |
Type of cable | Type A |
Cable diameter, min. | 4 mm |
Cable diameter, max. | 9 mm |
Conductor cross-section, min. | 0.2 mm² |
Conductor cross-section, max. | 2.5 mm² |
total current output to field devices, max. | 480 mA |
Number of connectable field devices | 8 |
Current limitation per field device, max. | 60 mA |
Short-circuit current (test current); max. | 6 mA |
intrinsically safe according to FISCO model | No |
Debounce logic | Yes |
Dimensions |
Width | 360 mm |
Height | 120 mm; without screw glands |
Depth | 83 mm |
Weights |
Weight, approx. | 3 000 g |
last modified: | 03/13/2019 |