6ES7153-4AA01-0XB0
IM153-4 PN IO for 12 Modules S7-300

From SIEMENS

SIMATIC DP, Connection ET 200M IM 153-4 PN IO for max. 12 S7-300 modules, extended functions: Isochronous real-time Communication Class 1 and 2, module replacement without PG operation without MMC, maintenance Support of new IO modules
General information
Product type designationIM 153-4 PN ST
Vendor identification (VendorID)002AH
Device identifier (DeviceID)0302H
Supply voltage
Rated value (DC)24 V
24 V DCYes
permissible range, lower limit (DC)20.4 V
permissible range, upper limit (DC)28.8 V
external protection for power supply lines (recommendation)In a construction with grounded reference potential, a fuse is necessary for redundant interface modules (Recommendation: 2.5 A)
Mains buffering
Mains/voltage failure stored energy time5 ms
Input current
Current consumption, max.600 mA; with 24 V DC supply
Inrush current, typ.4 A
I²t0.09 A²·s
Output voltage
Rated value (DC)5 V
Output current
for backplane bus (5 V DC), max.1.5 A
Power loss
Power loss, typ.6 W
Address area
Addressing volume
Inputs192 byte
Outputs192 byte
Hardware configuration
Number of modules per DP slave interface, max.12
Protocols
Bus protocol/transmission protocolPROFINET IO
Protocols (Ethernet)
TCP/IPNo
Redundancy mode
MRPYes
PROFINET system redundancy (S2)No
Interrupts/diagnostics/status information
Diagnostics indication LED
for module diagnosticsYes
Connection to network LINK (green)Yes
Transmit/receive RX/TX (yellow)Yes
Potential separation
Potential separation existsYes
Isolation
Isolation tested with500 V DC
Degree and class of protection
IP degree of protectionIP20
Ambient conditions
Ambient temperature during operation
min.0 °C
max.60 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.2 000 m
Dimensions
Width40 mm
Height125 mm
Depth118 mm
Weights
Weight, approx.215 g
last modified:03/13/2019

External links