6ES7153-2BA01-0XB0
ET200M, INTERFACE IM153-2 HF

From SIEMENS

SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE
General information
Vendor identification (VendorID)801Eh
Supply voltage
Rated value (DC)
24 V DCYes
external protection for power supply lines (recommendation)2,5 A
Mains buffering
Mains/voltage failure stored energy time5 ms
Input current
Current consumption, max.470 mA
Inrush current, typ.3.5 A
I²t0.08 A²·s
Power loss
Power loss, typ.4 W
Address area
Addressing volume
Inputs128 byte
Outputs128 byte
Hardware configuration
Number of modules per DP slave interface, max.8
Time stamping
Accuracy1 ms
Number of message buffers15
Number of stampable digital inputs, max.128
Time formatRFC 1119 Internet (ISP)
Time resolution0.466 ns
Time stamp on signal change1
Interfaces
Transmission procedureRS 485
PROFIBUS DP
Node addresses1 to 125
automatic detection of transmission rateYes
Output current, max.70 mA
Transmission rate, max.12 Mbit/s
SYNC capabilityYes
FREEZE capabilityYes
Direct data exchange (slave-to-slave communication)Yes; only with F- DO
Design of electrical connection of PROFIBUS interface9-pin sub D
1. Interface
PROFIBUS DP slave
GSD fileSI03801E.GSG
automatic baud rate searchYes
Protocols
Bus protocol/transmission protocolPROFIBUS DP
Degree and class of protection
IP degree of protectionIP20
Ambient conditions
Ambient temperature during operation
min.0 °C
max.60 °C
Altitude during operation relating to sea level
Installation altitude above sea level, max.3 500 m
Configuration
Configuration software
STEP 7Yes
Dimensions
Width40 mm
Height125 mm
Depth117 mm
Weights
Weight, approx.350 g
last modified:03/13/2019

External links