6ES7153-2AA02-0XB0 ET200M, INTERFACE MODULE IM153-2
From SIEMENS
| SIMATIC DP, ET 200M INTERFACE FOR MAX. 8 S7-300 MODULES, WITH REDUNDANCY, TIME STAMPING | ||
| General information | ||
| Vendor identification (VendorID) | 801Eh | |
| Supply voltage | ||
| Rated value (DC) | ||
| 24 V DC | Yes | |
| external protection for power supply lines (recommendation) | not necessary | |
| Mains buffering | ||
| Mains/voltage failure stored energy time | 5 ms | |
| Input current | ||
| Current consumption, max. | 550 mA; At 24 V DC | |
| Inrush current, typ. | 2.5 A | |
| I²t | 0.1 A²·s | |
| Output voltage | ||
| Rated value (DC) | 5 V | |
| Output current | ||
| for backplane bus (5 V DC), max. | 1 A | |
| Power loss | ||
| Power loss, typ. | 5 W | |
| Address area | ||
| Addressing volume | ||
| Inputs | 128 byte | |
| Outputs | 128 byte | |
| Hardware configuration | ||
| Number of modules per DP slave interface, max. | 8 | |
| Time stamping | ||
| Accuracy | 10 ms; 10 ms / 3 ms | |
| Number of message buffers | 15 | |
| Messages per message buffer | 20 | |
| Number of stampable digital inputs, max. | 128 | |
| Time format | RFC 1119 Internet (ISP) | |
| Time resolution | 1 ms | |
| Time interval for transmitting the message buffer if a message is present | 1 000 ms | |
| Time stamp on signal change | rising / falling edge as signal entering or exiting | |
| Interfaces | ||
| Transmission procedure | RS 485 | |
| PROFIBUS DP | ||
| Node addresses | 1 to 125 permitted | |
| automatic detection of transmission rate | Yes | |
| Output current, max. | 90 mA | |
| Transmission rate, max. | 12 Mbit/s | |
| SYNC capability | Yes | |
| FREEZE capability | Yes | |
| Direct data exchange (slave-to-slave communication) | Yes; Sender | |
| Design of electrical connection of PROFIBUS interface | 9-pin sub D socket | |
| 1. Interface | ||
| PROFIBUS DP slave | ||
| GSD file | (for DPV1) SIEM801E.GSD; SI01801E.GSG (for IM 153-2AA0x); SI02801E.GSG (for IM 153-2BA0x) | |
| automatic baud rate search | Yes | |
| Protocols | ||
| Bus protocol/transmission protocol | PROFIBUS DP to EN 50170 | |
| Isolation | ||
| Isolation tested with | Isolation voltage 500 V | |
| Degree and class of protection | ||
| IP degree of protection | IP20 | |
| Ambient conditions | ||
| Ambient temperature during operation | ||
| min. | 0 °C | |
| max. | 60 °C | |
| Dimensions | ||
| Width | 40 mm | |
| Height | 125 mm | |
| Depth | 117 mm | |
| Weights | ||
| Weight, approx. | 360 g | |
| last modified: | 03/13/2019 | |
