6ES7151-1AB05-0AB0 ET200S, Interface Module IM151-1 FO
From SIEMENS
SIMATIC DP, Interface module IM 151-1 FO for ET 200S; Transmission rate to 12 Mbit/s; Data volume of 244 bytes each for inputs and outputs; max. 63 power, electronic or motor starter modules can be connected; bus connection via integr. FOC incl. termination module | ||
General information | ||
Product type designation | IM 151-1 FO | |
Vendor identification (VendorID) | 806Bh | |
Supply voltage | ||
Mains buffering | ||
Mains/voltage failure stored energy time | 20 ms | |
Input current | ||
from supply voltage 1L+, max. | 200 mA | |
Output current | ||
for backplane bus (5 V DC), max. | 700 mA | |
Power loss | ||
Power loss, typ. | 3.3 W | |
Address area | ||
Addressing volume | ||
Inputs | 244 byte | |
Outputs | 244 byte | |
Interfaces | ||
Interface physics, FOC | Yes; 4 x Simplex socket | |
PROFIBUS DP | ||
Transmission rate, max. | 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 12 Mbit/s | |
SYNC capability | Yes | |
FREEZE capability | Yes | |
Direct data exchange (slave-to-slave communication) | Yes | |
Cable length, max. | 2 m | |
Protocols | ||
Supports protocol for PROFINET IO | No | |
PROFIBUS DP | Yes | |
Protocols (Ethernet) | ||
TCP/IP | No | |
Isochronous mode | ||
Isochronous operation (application synchronized up to terminal) | No | |
Interrupts/diagnostics/status information | ||
Alarms | Yes | |
Diagnostics function | Yes | |
Diagnostics indication LED | ||
Bus fault BF (red) | Yes | |
Group error SF (red) | Yes | |
Monitoring 24 V voltage supply ON (green) | Yes | |
Potential separation | ||
between backplane bus and electronics | No | |
between supply voltage and electronics | No | |
Permissible potential difference | ||
between different circuits | 500 V DC | |
Isolation | ||
Isolation tested with | 57 V DC/60 V AC | |
Dimensions | ||
Width | 45 mm | |
Height | 119.5 mm | |
Depth | 75 mm | |
Weights | ||
Weight, approx. | 150 g | |
last modified: | 03/25/2019 |