6ES7148-3FA00-0XB0 ET200eco, El-Mod., 4/8 F-DI, 24V DC
From SIEMENS
| SIMATIC DP, Electronics module f. ET200ECO, 4/8 F-DI PROFIsafe 24 V DC up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849) | ||
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| Reverse polarity protection | No | |
| Input current | ||
| from supply voltage 1L+, max. | 100 mA | |
| Encoder supply | ||
| Number of outputs | 2 | |
| Type of output voltage | min. L+ (-1.5 V) | |
| Short-circuit protection | Yes | |
| Output current | ||
| Rated value | 300 mA | |
| Power loss | ||
| Power loss, typ. | 3 W | |
| Digital inputs | ||
| Number of digital inputs | 8; 8 single channel, 4 two-channel | |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes | |
| Number of simultaneously controllable inputs | ||
| all mounting positions | ||
| — up to 55 °C, max. | 8 | |
| Input voltage | ||
| Type of input voltage | DC | |
| Rated value (DC) | 24 V | |
| for signal "0" | -30 to +5V | |
| for signal "1" | +15 to +30V | |
| Input current | ||
| for signal "1", typ. | 3.7 mA | |
| Cable length | ||
| unshielded, max. | 30 m | |
| Encoder | ||
| Connectable encoders | ||
| 2-wire sensor | No | |
| Interfaces | ||
| PROFIBUS DP | ||
| Transmission rate, max. | 12 Mbit/s | |
| Protocols | ||
| PROFIBUS DP | Yes | |
| Interrupts/diagnostics/status information | ||
| Diagnostic messages | ||
| Diagnostic information readable | Yes | |
| Diagnostics indication LED | ||
| Group error SF (red) | Yes | |
| Status indicator digital input (green) | Yes | |
| Channel fault indicator F (red) | No | |
| Potential separation | ||
| between PROFIBUS DP and all other circuit components | Yes | |
| Potential separation digital inputs | ||
| between the channels | No | |
| Permissible potential difference | ||
| between different circuits | 75 V DC/60 V AC | |
| Isolation | ||
| Isolation tested with | 500V AC for 1 minute | |
| Degree and class of protection | ||
| IP degree of protection | IP65/67 | |
| Standards, approvals, certificates | ||
| Suitable for safety functions | Yes | |
| Highest safety class achievable in safety mode | ||
| acc. to EN 954 | 4 | |
| Performance level according to ISO 13849-1 | e | |
| SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) | |
| Connection method | ||
| Design of electrical connection | 4/5-pin M12 circular connectors | |
| Dimensions | ||
| Width | 60 mm | |
| Height | 210 mm | |
| Depth | 28 mm | |
| Weights | ||
| Weight, approx. | 220 g | |
| last modified: | 03/13/2019 | |
