| SIMATIC DP, Electronic modules for ET 200 PRO 4 DO 24 V DC, 2.0A High Feature, Channel diagnostics; short-circuit and wire break; incl. bus module, Connection module IO 6ES7194-4..00-0AA0 order separately |
| Supply voltage |
| Load voltage 2L+ |
| Rated value (DC) | 24 V |
| Short-circuit protection | Yes; per channel, electronic |
| Reverse polarity protection | Yes; against destruction; load increasing |
| Input current |
| from load voltage 2L+ (without load), max. | 40 mA |
| from backplane bus 3.3 V DC, max. | 30 mA |
| Power loss |
| Power loss, typ. | 2.5 W |
| Address area |
| Address space per module |
| Address space per module, max. | 1 byte |
| Digital outputs |
| Number of digital outputs | 4 |
| Short-circuit protection | Yes |
| Response threshold, typ. | 2.8 A |
| Limitation of inductive shutdown voltage to | 2L+ (-47 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs |
| on lamp load, max. | 10 W |
| Load resistance range |
| lower limit | 12 Ω |
| upper limit | 4 kΩ |
| Output voltage |
| for signal "1", min. | 2L+ (-0,8 V) |
| Output current |
| for signal "1" rated value | 2 A |
| for signal "0" residual current, max. | 0.5 mA |
| Parallel switching of two outputs |
| for uprating | No |
| for redundant control of a load | Yes |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz |
| on lamp load, max. | 1 Hz |
| Total current of the outputs (per group) |
| all mounting positions |
| — up to 55 °C, max. | 4 A |
| Cable length |
| shielded, max. | 30 m |
| unshielded, max. | 30 m |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Wire-break | Yes; channel by channel |
| Short-circuit | Yes; channel by channel |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Channel fault indicator F (red) | Yes |
| Potential separation |
| between backplane bus and all other circuit components | Yes |
| Potential separation digital outputs |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Isolation |
| Isolation tested with | 707 V DC (type test) |
| Standards, approvals, certificates |
| Suitable for safety-related tripping of standard modules | Yes |
| Highest safety class achievable for safety-related tripping of standard modules |
| Performance level according to ISO 13849-1 | PL d |
| Category according to ISO 13849-1 | Cat. 3 |
| SILCL according to IEC 62061 | SILCL 2 |
| Dimensions |
| Width | 45 mm |
| Height | 130 mm |
| Depth | 35 mm; without terminal module |
| Weights |
| Weight, approx. | 140 g |
| last modified: | 03/13/2019 |
