| SIMATIC DP, basic module BM 142 ET 200ECO: 16 DO 24 V DC/0.5A, 8xM12, Duplicate assignment, IP65/67, Connection block 6ES7194-3AA00-0.A0 order separately |
| General information |
| Vendor identification (VendorID) | 80FBh |
| Supply voltage |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Load voltage 2L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | Yes |
| Input current |
| from supply voltage 1L+, max. | 70 mA; Typical |
| from load voltage 2L+ (without load), max. | 80 mA; Typical |
| Power loss |
| Power loss, typ. | 4 W |
| Digital outputs |
| Number of digital outputs | 16 |
| Short-circuit protection | Yes |
| Response threshold, typ. | 1.4 A; Per channel |
| Limitation of inductive shutdown voltage to | 2L+ (-47 V) |
| Controlling a digital input | Yes |
| Switching capacity of the outputs |
| on lamp load, max. | 5 W |
| Load resistance range |
| lower limit | 12 Ω |
| upper limit | 4 kΩ |
| Output voltage |
| for signal "1", min. | 2L+ (-0,8 V) |
| Output current |
| for signal "1" rated value | 0.5 A |
| for signal "1" permissible range for 0 to 55 °C, min. | 5 mA |
| for signal "1" permissible range for 0 to 55 °C, max. | 1 A |
| for signal "0" residual current, max. | 0.1 mA |
| Parallel switching of two outputs |
| for uprating | No |
| for redundant control of a load | Yes |
| Switching frequency |
| with resistive load, max. | 100 Hz |
| with inductive load, max. | 0.5 Hz; According to IEC 60947-5-1, DC-13 |
| on lamp load, max. | 1 Hz |
| Total current of the outputs (per group) |
| all mounting positions |
| — up to 55 °C, max. | 4 A; Please note the current carrying capacity of the cable! |
| Cable length |
| unshielded, max. | 30 m |
| Interfaces |
| PROFIBUS DP |
| Transmission rate, max. | 12 Mbit/s; 9,6 / 19,2 / 45,45 / 93,75 / 187,5 / 500 kbit/s; 1,5 / 3 / 6 / 12 Mbit/s |
| Protocols |
| PROFIBUS DP | Yes |
| Interrupts/diagnostics/status information |
| Alarms | No |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Channel fault indicator F (red) | No |
| Potential separation |
| between PROFIBUS DP and all other circuit components | Yes |
| Potential separation digital outputs |
| between the channels | No |
| Permissible potential difference |
| between different circuits | 75 V DC/60 V AC |
| Isolation |
| Isolation tested with | 500 V DC |
| Degree and class of protection |
| IP degree of protection | IP65/67 |
| Connection method |
| Design of electrical connection | 4/5-pin M12 circular connectors |
| Dimensions |
| Width | 60 mm |
| Height | 210 mm |
| Depth | 28 mm |
| Weights |
| Weight, approx. | 210 g |
| last modified: | 03/13/2019 |
