| ***Spare part*** SIMATIC DP, Electronics module f. ET200S, 4/8 F-DI PROFIsafe, 24 V DC, 30 mm overall width, up to Category 4 (EN 954-1)/ SIL3 (IEC61508)/PLE (ISO13849), can also be used in PROFINET configuration with IM 151-3 HF |
| Supply voltage |
| Rated value (DC) | |
| 24 V DC | Yes |
| Reverse polarity protection | No |
| Encoder supply |
| Number of outputs | 2 |
| Type of output voltage | min. L+ (-1.5 V) |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.8 A) |
| Output current |
| Rated value | 300 mA |
| permissible range, lower limit | 0 mA |
| permissible range, upper limit | 300 mA |
| Power loss |
| Power loss, typ. | 4 W |
| Address area |
| Address space per module |
| Inputs | 6 byte |
| Outputs | 4 byte |
| Digital inputs |
| Number of digital inputs | 8; 8 single channel, 4 two-channel |
| Input characteristic curve in accordance with IEC 61131, type 1 | Yes |
| Number of simultaneously controllable inputs |
| Number of simultaneously controllable inputs | 8 |
| Input voltage |
| Type of input voltage | DC |
| Rated value (DC) | 24 V |
| for signal "0" | -30 to +5V |
| for signal "1" | +15 to +30V |
| Input current |
| for signal "1", typ. | 3.7 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — parameterizable | Yes |
| — at "0" to "1", min. | 0.3 ms |
| — at "0" to "1", max. | 17 ms |
| — at "1" to "0", min. | 0.3 ms |
| — at "1" to "0", max. | 17 ms |
| Cable length |
| shielded, max. | 200 m |
| unshielded, max. | 200 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | No |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Short-circuit | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Status indicator digital input (green) | Yes |
| Potential separation |
| Potential separation digital inputs |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Between the channels and load voltage L+ | No |
| Permissible potential difference |
| between M internally and the inputs | 75 V DC/60 V AC |
| Isolation |
| Isolation tested with | 500 V DC |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| acc. to EN 954 | 4 |
| Performance level according to ISO 13849-1 | e |
| SIL acc. to IEC 61508 | SIL 2 (single-channel), SIL 3 (two-channel) |
| Dimensions |
| Width | 30 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weights |
| Weight, approx. | 78 g |
| last modified: | 03/29/2019 |
