| SIMATIC DP, Power Module PM-E F PROFIsafe, f. ET200S; 24 V DC suitable for grounded setup relay for switching the voltage buses P1 and P2 up to Category 3 (EN 954-1)/ SIL2 (IEC61508)/PLD (ISO13849), can also be used in PROFINET configuration with IM 151-3 HF |
| Supply voltage |
| Load voltage L+ |
| Rated value (DC) | 24 V |
| Reverse polarity protection | No |
| Input current |
| From load voltage L+ (no load), typ. | 100 mA |
| from backplane bus 24 V DC, max. | 28 mA |
| Power loss |
| Power loss, typ. | 4 W |
| Address area |
| Address space per module |
| Inputs | 5 byte |
| Outputs | 5 byte |
| Digital outputs |
| Number of digital outputs | 1; Relays |
| Short-circuit protection | No |
| Controlling a digital input | Yes |
| Switching capacity of the outputs |
| on lamp load, max. | 100 W |
| Switching frequency |
| with resistive load, max. | 2 Hz |
| with inductive load, max. | 0.1 Hz; with inductive load to IEC 60947-5-1, DC-13 / AC-15 |
| on lamp load, max. | 2 Hz |
| Total current of the outputs (per group) |
| horizontal installation |
| — up to 40 °C, max. | 10 A |
| — up to 55 °C, max. | 8 A |
| — up to 60 °C, max. | 7 A |
| vertical installation |
| — up to 40 °C, max. | 8 A |
| Relay outputs |
| Switching capacity of contacts |
| — with resistive load, up to 50 °C, max. | 10 A |
| Interrupts/diagnostics/status information |
| Diagnostics function | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Wire-break | No |
| Short-circuit | Yes |
| missing load voltage | Yes |
| Diagnostics indication LED |
| Rated load voltage PWR (green) | Yes |
| Group error SF (red) | Yes |
| Status indicator digital output (green) | Yes |
| Potential separation |
| Potential separation digital outputs |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Between the channels and load voltage L+ | No |
| Isolation |
| Isolation tested with | 500 V DC |
| Standards, approvals, certificates |
| Highest safety class achievable in safety mode |
| acc. to EN 954 | 4 |
| Performance level according to ISO 13849-1 | e |
| SIL acc. to IEC 61508 | With Std-DO: Max. SIL 2, without Std-DO max. SIL 3 depending on configuration |
| Dimensions |
| Width | 30 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weights |
| Weight, approx. | 80 g |
| last modified: | 03/13/2019 |
