6ES7136-6AA00-0CA1
ET 200SP, F-AI 4XI (0)4..20mA HF

From SIEMENS

SIMATIC DP, ELECTRONIC MODULE ET 200SP, F-AI 4xI(0)4..20mA HF FAILSAFE ANALOG INPUTS up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
General information
Product type designationF-AI 4xI 0(4) ... 20 mA 2/4-wire HF
Firmware version
FW update possibleYes
usable BaseUnitsBU type A0, A1
Color code for module-specific color identification plateCC00
Product function
I&M dataYes; I&M0 to I&M3
Engineering with
STEP 7 TIA Portal configurable/integrated as of versionV15 with HSP 203
CiR – Configuration in RUN
Reparameterization possible in RUNNo
Calibration possible in RUNNo
Supply voltage
Rated value (DC)24 V
permissible range, lower limit (DC)19.2 V
permissible range, upper limit (DC)28.8 V
Reverse polarity protectionYes
Input current
Current consumption (rated value)0.38 A
Current consumption, max.0.4 A
Encoder supply
24 V encoder supply
24 VYes; min. L+ (-1.5 V)
Short-circuit protectionYes
Output current, max.300 mA; total current of all encoders/channels
Power
Power available from the backplane bus70 mW
Power loss
Power loss, typ.2 W
Address area
Address space per module
Inputs14 byte; S7-300/400F CPU, 13 byte
Outputs5 byte; S7-300/400F CPU, 4 byte
Hardware configuration
Automatic encoding
Electronic coding element type FYes
Analog inputs
Number of analog inputs4
For current measurement4
permissible input current for current input (destruction limit), max.35 mA
Input ranges (rated values), currents
0 to 20 mAYes
Input resistance (0 to 20 mA)125 Ω
4 mA to 20 mAYes
Input resistance (4 mA to 20 mA)125 Ω
Cable length
shielded, max.1 000 m
Analog value generation for the inputs
Measurement principleSigma Delta
Integration and conversion time/resolution per channel
Resolution with overrange (bit including sign), max.16 bit
Integration time, parameterizableYes
Integration time (ms)20 / 16,667
Interference voltage suppression for interference frequency f1 in Hz50 / 60 Hz
Smoothing of measured values
Number of smoothing levels7
parameterizableYes
Step: NoneYes; 1x conversion cycle time
Step: lowYes; 2x / 4x conversion cycle time
Step: MediumYes; 8x / 16x conversion cycle time
Step: HighYes; 32x / 64x conversion cycle time
Encoder
Connection of signal encoders
for current measurement as 2-wire transducerYes
— Burden of 2-wire transmitter, max.650 Ω
for current measurement as 4-wire transducerYes
Errors/accuracies
Linearity error (relative to input range), (+/-)0.1 %
Temperature error (relative to input range), (+/-)0.023 %/K
Repeat accuracy in steady state at 25 °C (relative to input range), (+/-)0.1 %
Operational error limit in overall temperature range
Current, relative to input range, (+/-)2 %
Basic error limit (operational limit at 25 °C)
Current, relative to input range, (+/-)0.1 %
Interference voltage suppression for f = n x (f1 +/- 1 %), f1 = interference frequency
Series mode interference (peak value of interference < rated value of input range), min.40 dB
Common mode interference, min.70 dB
Interrupts/diagnostics/status information
Diagnostics functionYes, "Alarms/diagnostic messages" section in the manual
Alarms
Diagnostic alarmYes
Limit value alarmYes
Diagnostic messages
Monitoring the supply voltageYes
Wire-breakYes; Measuring range 4 to 20 mA only
Short-circuitYes
Diagnostics indication LED
RUN LEDYes; Green LED
ERROR LEDYes; Red LED
Monitoring of the supply voltage (PWR-LED)Yes; green PWR LED
Channel status displayYes; Green LED
for channel diagnosticsYes; Red LED
for module diagnosticsYes; Green/red LED
Potential separation
Potential separation channels
between the channelsNo
between the channels and backplane busYes
between the channels and the power supply of the electronicsYes
Permissible potential difference
between the inputs (UCM)10 Vpp
Isolation
Isolation tested with707 V DC (type test)
Ambient conditions
Ambient temperature during operation
horizontal installation, min.0 °C
horizontal installation, max.60 °C
vertical installation, min.0 °C
vertical installation, max.50 °C
Dimensions
Width15 mm
Height73 mm
Depth58 mm
Weights
Weight, approx.48 g
last modified:03/13/2019

External links