| SIMATIC DP, electronics module for ET200iSP, 4 AQ HART, 4 ... 20 mA, for connecting HART field devices Supported HART protocol Version 6.0 |
| Input current |
| Current consumption, typ. | 295 mA |
| from load voltage L+ (without load), max. | 330 mA |
| Power loss |
| Power loss, typ. | 2.7 W |
| Analog outputs |
| Number of analog outputs | 4 |
| Cycle time (all channels) max. | 3.6 ms |
| Output ranges, current |
| 0 to 20 mA | Yes |
| 4 mA to 20 mA | Yes |
| Connection of actuators |
| for current output two-wire connection | Yes |
| Load impedance (in rated range of output) |
| with current outputs, max. | 750 Ω |
| Cable length |
| shielded, max. | 500 m |
| Analog value generation for the outputs |
| Integration and conversion time/resolution per channel |
| Resolution with overrange (bit including sign), max. | 14 bit |
| Settling time |
| for resistive load | 4 ms |
| for capacitive load | 40 ms |
| for inductive load | 40 ms |
| Errors/accuracies |
| Linearity error (relative to output range), (+/-) | 0.015 % |
| Temperature error (relative to output range), (+/-) | 0.005 %/K |
| Crosstalk between the outputs, min. | -50 dB |
| Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.01 % |
| Operational error limit in overall temperature range |
| Current, relative to output range, (+/-) | 0.15 % |
| Basic error limit (operational limit at 25 °C) |
| Current, relative to output range, (+/-) | 0.1 % |
| Interrupts/diagnostics/status information |
| Substitute values connectable | Yes |
| Alarms |
| Diagnostic alarm | Yes |
| Diagnostic messages |
| Diagnostic information readable | Yes |
| Wire-break | Yes |
| Short-circuit | Yes |
| Diagnostics indication LED |
| Group error SF (red) | Yes |
| Potential separation |
| Potential separation analog outputs |
| between the channels | No |
| between the channels and backplane bus | Yes |
| Standards, approvals, certificates |
| CE mark | Yes |
| Use in hazardous areas |
| Type of protection acc. to EN 50020 (CENELEC) | II2 G (1) GD Ex ib[ia] IIC T4 and I M2 Ex ib[ia] I |
| Type of protection acc. to KEMA | 04 ATEX 1250 |
| Dimensions |
| Width | 30 mm |
| Height | 129 mm |
| Depth | 136.5 mm |
| Weights |
| Weight, approx. | 265 g |
| last modified: | 03/13/2019 |
