| *** SPARE PART*** SIMATIC DP, ELECTRONIC MODULE DIGITAL, FOR ET 200B, W=235MM, 32DI 24V DC, 3MS INPUT DELAY |
| General information |
| Usable terminal block | TB2/DC, TB2-4/DC, TB4/DC, TB4-4/DC |
| Supply voltage |
| Rated value (DC) | 24 V; L5+; value at t < 0.5 s: 35 V |
| permissible range, lower limit (DC) | 18.5 V |
| permissible range, upper limit (DC) | 30.2 V |
| Input current |
| Current consumption, typ. | 70 mA; From L5+; logic |
| Current consumption, max. | 1 000 mA; from L5+; sensor |
| I²t | 0.05 A²·s; with starting current inrush |
| Power loss |
| Power loss, typ. | 4.8 W |
| Digital inputs |
| Number of digital inputs | 32 |
| Input voltage |
| Rated value (DC) | 24 V |
| for signal "0" | -30 to +5V |
| for signal "1" | 13 to 30V |
| Input current |
| for signal "1", typ. | 4 mA; At 24 V min. 2 mA |
| Input delay (for rated value of input voltage) |
| for standard inputs |
| — at "0" to "1", max. | 3 ms |
| Cable length |
| unshielded, max. | 100 m |
| Encoder |
| Connectable encoders |
| 2-wire sensor | Yes |
| — permissible quiescent current (2-wire sensor), max. | 1.5 mA |
| Interfaces |
| PROFIBUS DP |
| Transmission rate, max. | 12 Mbit/s |
| Protocols |
| Bus protocol/transmission protocol | PROFIBUS DP |
| PROFIBUS DP |
| Services |
| — FREEZE capability | Yes |
| Interrupts/diagnostics/status information |
| Diagnostics indication LED |
| RUN LED | Yes |
| Bus fault BF (red) | Yes |
| Status indicator digital input (green) | Yes |
| Potential separation |
| between electronic block and PROFIBUS DP | Yes |
| Potential separation digital inputs |
| Potential separation digital inputs | No |
| Degree and class of protection |
| Degree of protection acc. to EN 60529 | IP20 |
| Ambient conditions |
| Ambient temperature during operation |
| horizontal installation, min. | 0 °C |
| horizontal installation, max. | 60 °C; 40°C for other mountings |
| Air pressure acc. to IEC 60068-2-13 |
| permissible range, lower limit | 795 hPa |
| permissible range, upper limit | 1 080 hPa |
| Relative humidity |
| Operation, min. | 15 % |
| Operation, max. | 95 %; RH class 2 in accordance with IEC 1131-2 |
| Vibrations |
| Operation, tested according to IEC 60068-2-6 | Yes; IEC 68, Part 2-6; 10 to 57 Hz; (constant amplitude 0.075 mm); 57 to 150 Hz; (constant acceleration 1 g) |
| Shock testing |
| tested according to IEC 60068-2-27 | Yes; IEC 68, Part 2-27; half-sine, 15 g, 11 ms |
| Connection method |
| Design of electrical connection for the inputs and outputs | Screw-type and spring-loaded terminals, permanent wiring; 3 and 4-wire connection |
| Dimensions |
| Width | 235 mm; EB and TB |
| Height | 130 mm; EB and TB |
| Depth | 60 mm; EB and TB |
| Weights |
| Weight, approx. | 800 g; EB and TB |
| last modified: | 03/13/2019 |
