| SITOP PSU6200 24 V/20 A |
| SITOP PSU6200 24 V/20 A Stabilized power supply Input: 120 - 230 V AC, (120 - 240 V DC) Output: 24 V DC/20 A with diagnostics interface |
| Input |
| Input | 1-phase AC or DC |
| Rated voltage value Vin rated | 120 ... 230 V |
| Voltage range AC | 85 ... 264 V |
| Supply voltage | |
| at DC | 110 ... 240 V |
| Input voltage | |
| at DC | 85 ... 275 V |
| Wide-range input | Yes |
| Overvoltage resistance | 300 V AC for 30 s |
| Mains buffering at Iout rated, min. | 25 ms; at Vin = 230 V |
| Rated line frequency 1 | 50 Hz |
| Rated line frequency 2 | 60 Hz |
| Rated line range | 47 ... 63 Hz |
| Input current | |
| at rated input voltage 120 V | 4.3 A |
| at rated input voltage 230 V | 2.3 A |
| Switch-on current limiting (+25 °C), max. | 12 A |
| Built-in incoming fuse | 10 A |
| Output |
| Output | Controlled, isolated DC voltage |
| Number of outputs | 1 |
| Rated voltage Vout DC | 24 V |
| Total tolerance, static ± | 3 % |
| Static mains compensation, approx. | 0.2 % |
| Static load balancing, approx. | 0.2 % |
| Residual ripple peak-peak, max. | 80 mV |
| Residual ripple peak-peak, typ. | 50 mV |
| Spikes peak-peak, max. (bandwidth: 20 MHz) | 100 mV |
| Spikes peak-peak, typ. (bandwidth: 20 MHz) | 60 mV |
| Adjustment range | 24 ... 28 V |
| Product function Output voltage adjustable | Yes |
| Output voltage setting | via potentiometer; max. 480 W (576 W up to 45°C) |
| Status display | Green LED for 24 V OK |
| Signaling | Electronic contact (NO contact, contact rating 60 V DC/0.1 A) for 24 V O.K. or diagnostic interface |
| On/off behavior | Overshoot of Vout approx. 3 % |
| Startup delay, max. | 0.5 s |
| Voltage rise, typ. | 100 ms |
| Rated current value Iout rated | 20 A |
| Current range | 0 ... 20 A |
| Note | 24 A up to +45°C; +60 ... +70 °C: Derating 1%/K |
| Supplied active power typical | 480 W |
| Short-term overload current | |
| on short-circuiting during the start-up typical | 30 A |
| at short-circuit during operation typical | 30 A |
| Product feature parallel switching of outputs | can be set with DIP switch |
| Parallel switching for enhanced performance | Yes; switchable characteristic |
| Numbers of parallel switchable units for enhanced performance | 2 |
| Efficiency |
| Efficiency at Vout rated, Iout rated, approx. | 95.1 % |
| Power loss at Vout rated, Iout rated, approx. | 25 W |
| Power loss [W] during no-load operation maximum | 2.6 W |
| Closed-loop control |
| Dynamic load smoothing (Iout: 10/90/10 %), Uout ± typ. | 3 % |
| Load step setting time 10 to 90%, typ. | 0.5 ms |
| Load step setting time 90 to 10%, typ. | 0.5 ms |
| Setting time maximum | 1 ms |
| Protection and monitoring |
| Output overvoltage protection | < 32 V |
| Current limitation, typ. | 30 A |
| Property of the output Short-circuit proof | Yes |
| Short-circuit protection | Shutdown and periodic restart attempts |
| Overcurrent overload capability in normal operation | overload capability 150 % Iout rated up to 5 s/min |
| Safety |
| Primary/secondary isolation | Yes |
| Galvanic isolation | Safety extra low output voltage Vout according to EN 60950-1 |
| Protection class | Class I |
| Leakage current | |
| maximum | 3.5 mA |
| CE mark | Yes |
| UL/cUL (CSA) approval | cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259; cCSAus (CSA C22.2 No. 60950-1, UL 60950-1) |
| Explosion protection | - |
| FM approval | - |
| CB approval | Yes |
| Regulatory Compliance Mark (RCM) | No |
| Marine approval | in process: DNV GL, ABS |
| Degree of protection (EN 60529) | IP20 |
| EMC |
| Emitted interference | EN 55022 Class B |
| Supply harmonics limitation | EN 61000-3-2 |
| Noise immunity | EN 61000-6-2 |
| Operating data |
| Ambient temperature | |
| during operation | -25 ... +70 °C |
| — Note | with natural convection |
| during transport | -40 ... +85 °C |
| during storage | -40 ... +85 °C |
| Humidity class according to EN 60721 | Climate class 3K3, no condensation |
| Mechanics |
| Connection technology | Push-in terminals |
| Connections | |
| Supply input | L1/+, L2/N/-; PE PushIn for 0.5 ... 4 mm² single-core/finely stranded |
| Output | +1, +2, -1, -2, -3: PushIn for 0.5 ... 6 mm² |
| Auxiliary | 13, 14 (alarm signal): 1 push-in terminal each for 0.2 ... 1.5 mm² |
| Width of the enclosure | 70 mm |
| Height of the enclosure | 135 mm |
| Depth of the enclosure | 155 mm |
| Required spacing | |
| top | 45 mm |
| bottom | 45 mm |
| left | 0 mm |
| right | 0 mm |
| Product feature of the enclosure housing for side-by-side mounting | Yes |
| Installation | Snaps onto DIN rail EN 60715 35x7.5/15 |
| Electrical accessories | Buffer module, redundancy module |
| Mechanical accessories | Device identification label 20 mm × 7 mm, TI-grey 3RT2900-1SB20 |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| |
