| SITOP UPS500P 7 A/5 KWS, IP65 |
| SITOP UPS500P Maintenance free Uninterruptible Power supply With USB interface Basic device 5 kWs input: 24 V DC output: 24 V DC/7 A Degree of protection IP65 |
| Input |
| Supply voltage at DC Rated value | 24 V |
| Voltage curve at input | DC |
| input voltage range | 22.5 ... 29 V DC |
| Adjustable response value voltage for buffer connection preset | 22.5 V |
| Adjustable response value voltage for buffer connection | permanently set |
| Input current at rated input voltage 24 V Rated value | 7 A; + approx. 2 A with empty energy storage (capacitor) |
| Mains buffering |
| Type of energy storage | with capacitors |
| Design of the mains power cut bridging-connection | 7 A for 49 s or 5 A for 68 s or 3 A for 108 s or 1 A for 351 s |
| Energy content of energy storage | 5 kW.s |
| Charging current | 2 A |
| adjustable charging current maximum Note | permanently set |
| Output |
| Output voltage | |
| in normal operation at DC Rated value | 24 V |
| in buffering mode at DC Rated value | 24 V |
| Formula for output voltage | 24 V ± 3 % |
| ON-delay time typical | 0.6 s |
| Voltage increase time of the output voltage typical | 25 ms |
| Output voltage in buffering mode at DC | 24 ... 24.7 V |
| Output current | |
| Rated value | 7 A |
| in normal operation | 0 ... 7 A |
| in buffering mode | 0 ... 7 A |
| Peak current | 22.5 A |
| Supplied active power typical | 168 W |
| Efficiency |
| Efficiency in percent | |
| at rated output current for rated value of the output current typical | 96.5 % |
| Power loss [W] | |
| at rated output current for rated value of the output current typical | 5.2 W |
| Protection and monitoring |
| Product function | |
| reverse polarity protection against energy storage unit polarity reversal | Yes |
| reverse polarity protection against input voltage polarity reversal | Yes |
| Signaling |
| Display version | |
| for normal operation | Normal operation: LED green (OK); Lack of buffer standby: LED red (ALARM); Energy storage > 85%: LED green (CAP. > 85%) |
| in buffering mode | Buffered mode: LED yellow (BAT); Prewarning buffer end after expiry of 80% of the available buffer time: LED red (ALARM); Energy storage > 85%: LED green (CAP. > 85%) |
| Interface |
| Product component PC interface | Yes |
| Design of the interface | USB |
| Safety |
| Galvanic isolation between entrance and outlet | No |
| Operating resource protection class | Class III |
| Certificate of suitability | |
| CE marking | Yes |
| as approval for USA | - |
| relating to ATEX | - |
| C-Tick | No |
| Shipbuilding approval | - |
| Protection class IP | IP65 |
| EMC |
| Standard | |
| for emitted interference | EN 55022 Class B |
| for interference immunity | EN 61000-6-2 |
| Operating data |
| Ambient temperature | |
| during operation | 0 ... 55 °C; with natural convection |
| during transport | -40 ... +70 °C |
| during storage | -40 ... +70 °C |
| Environmental category acc. to IEC 60721 | Climate class 3K3, no condensation |
| Mechanics |
| Type of electrical connection | Plug-in connection |
| at input | via connector set |
| at output | via connector set |
| for battery module | - |
| for control circuit and status message | - |
| Width of the enclosure | 400 mm |
| Height of the enclosure | 80 mm |
| Depth of the enclosure | 80 mm |
| Required spacing | |
| left | 0 mm |
| right | 0 mm |
| Net weight | 1.9 kg |
| Product feature of the enclosure housing for side-by-side mounting | No |
| Mounting type | Screw mounting |
| Electrical accessories | Connector set |
| MTBF at 40 °C | 500 000 h |
| Reference code acc. to DIN EN 81346-2 | T |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| |
