| SIEMENS ORDER NUMBER IS DISCONNECTED SINCE JUNE 6.2009 SUCCESSOR: 6BK1700-2AA10-0AA1 |
| Installation type/mounting |
| Mounting type | Control cabinet backplane |
| Mounting position | Horizontal |
| Type of ventilation | Self ventilation or forced ventilation |
| Supply voltage |
| Type of supply voltage | AC |
| Rated value (AC) | 230 V |
| Relative negative tolerance | 18 % |
| Relative positive tolerance | 15 % |
| Line frequency |
| Rated value 50 Hz | Yes |
| Rated value 60 Hz | Yes |
| Relative symmetrical tolerance | 5 % |
| Mains buffering |
| Mains/voltage failure stored energy time | 20 ms |
| Recovery time after power failure, typ. | 1 s |
| Connection method |
| Design of electrical connection for supply voltage | Connector, 2-pole |
| — Connectable conductor cross-sections, solid | 1x (0.2 ... 2.5 mm²) |
| — Connectable conductor cross-sections, finely stranded with wire end processing | 1x (0.25 ... 2.5 mm²) |
| — Connectable conductor cross-sections for AWG cables | 24 ... 12 |
| Power |
| Active power input | 15 W |
| Hardware configuration |
| Type of power output connectable | LA716 / LA716I / LA716I HP |
| Power capacity per rack with fan, max. | 176 kW |
| Power capacity per rack without fan, max. | 67 kW |
| Slots |
| Number of slots | 12 |
| Interfaces |
| Interfaces/bus type | PROFIBUS DP |
| Protocols |
| PROFIBUS DP | Yes |
| Interrupts/diagnostics/status information |
| Number of status displays | 2 |
| LED status display | LED green = status indicator, LED red = fault indicator |
| Isolation |
| Overvoltage category | III |
| Degree of pollution | 2 |
| EMC |
| EMC interference emission | in accordance with EN 61000-6-4:2007 + A1:2011 |
| Electrostatic discharge acc. to IEC 61000-4-2 | 4 kV contact discharge / 8 kV air discharge |
| Field-related interference acc. to IEC 61000-4-3 | 10 V/m (80 ... 1 000 MHz), 3 V/m (1.4 ... 2.0 GHz), 1 V/m (2.0 ... 2.7 GHz) |
| Conducted interference due to burst acc. to IEC 61000-4-4 | 2 kV voltage supply cables / 2 kV signal cables |
| Conducted interference due to surge acc. to IEC 61000-4-5 | On supply lines: 1 kV symmetrical, 2 kV asymmetrical, PROFIBUS cable asymmetrical 1 kV |
| Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6 | 10 V in the frequency range 0.15 ... 80 MHz, Mmdulation 80 % AM at 1 kHz, evaluation criterion A |
| Degree and class of protection |
| IP degree of protection | IP00 |
| Standards, approvals, certificates |
| Certificate of suitability | CE, KCC |
| CE mark | Yes |
| KC approval | Yes |
| EAC (formerly Gost-R) | Yes |
| China RoHS compliance | Yes |
| Reference designation according to DIN EN 81346-2 | K |
| Ambient conditions |
| Ambient temperature during operation |
| min. | 0 °C |
| max. | 55 °C |
| Ambient temperature during storage/transportation |
| Storage, min. | -40 °C |
| Storage, max. | 70 °C |
| Transportation, min. | -40 °C |
| Transportation, max. | 70 °C |
| Air pressure acc. to IEC 60068-2-13 |
| Operation, min. | 860 hPa |
| Operation, max. | 1 080 hPa |
| Storage, min. | 660 hPa |
| Storage, max. | 1 080 hPa |
| Altitude during operation relating to sea level |
| Installation altitude above sea level, max. | 2 000 m |
| Relative humidity |
| Operation at 25 ℃, max. | 95 % |
| Shock testing |
| Shock resistance during operation acc. to IEC 60068-2-27 | 15 g / 11 ms / 3 shocks/axis |
| Shock resistance during storage acc. to IEC 60068-2-29 | 25 g / 6 ms / 1 000 shocks/axis |
| Dimensions |
| Width | 510 mm |
| Height | 310 mm |
| Depth | 330 mm |
| last modified: | 03/13/2019 |
