| ***Spare part*** SIPLUS LOGO! 24RCo -40...+70°C with conformal coating based on 6ED1052-2HB00-0BA6 |
| Installation type/mounting |
| Mounting | on 35 mm DIN rail, 4 spacing units wide |
| Supply voltage |
| Rated value (DC) | |
| 24 V DC | Yes |
| permissible range, lower limit (DC) | 20.4 V; 22 V @ >55 °C |
| permissible range, upper limit (DC) | 28.8 V; 27.5 V @ >55 °C |
| Rated value (AC) | |
| 24 V AC | Yes |
| Time of day |
| Time switching clocks |
| Number | 8 |
| Power reserve | 80 h |
| Digital inputs |
| Number of digital inputs | 8 |
| Digital outputs |
| Number of digital outputs | 4; Relays |
| Short-circuit protection | No; external fusing necessary |
| Relay outputs |
| Switching capacity of contacts |
| — with inductive load, max. | 3 A; 1 A per relay @ > 55 °C; 3 A per relay @ > 55 °C & < 15 s |
| — with resistive load, max. | 10 A; 3 A per relay @ > 55 °C; 10 A per relay @ > 55 °C & < 15 s |
| EMC |
| Emission of radio interference acc. to EN 55 011 |
| Limit class B, for use in residential areas | Yes |
| Degree and class of protection |
| Degree of protection acc. to EN 60529 | |
| IP20 | Yes |
| Standards, approvals, certificates |
| CSA approval | No |
| UL approval | Yes; File: E120869 // Tmax = 55 °C |
| FM approval | No |
| developed in accordance with IEC 61131 | Yes |
| according to VDE 0631 | Yes |
| Marine approval | No |
| Ambient conditions |
| Ambient temperature during operation |
| min. | -40 °C; = Tmin |
| max. | 70 °C; = Tmax; 55 °C @ UL/cUL use |
| Altitude during operation relating to sea level |
| Installation altitude above sea level, max. | 5 000 m |
| Ambient air temperature-barometric pressure-altitude | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Relative humidity |
| With condensation, tested in accordance with IEC 60068-2-38, max. | 100 %; RH incl. condensation/frost permitted (no commissioning in bedewed state) |
| Resistance |
| Use in stationary industrial systems |
| — to biologically active substances according to EN 60721-3-3 | Yes; Class 3B2 mold, fungus and dry rot spores (with the exception of fauna); Class 3B3 on request |
| — to chemically active substances according to EN 60721-3-3 | Yes; Class 3C4 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| — to mechanically active substances according to EN 60721-3-3 | Yes; Class 3S4 incl. sand, dust, * |
| Use on ships/at sea |
| — to biologically active substances according to EN 60721-3-6 | Yes; Class 6B2 mold and fungal spores (excluding fauna); Class 6B3 on request |
| — to chemically active substances according to EN 60721-3-6 | Yes; Class 6C3 (RH < 75 %) incl. salt spray acc. to EN 60068-2-52 (severity degree 3); * |
| — to mechanically active substances according to EN 60721-3-6 | Yes; Class 6S3 incl. sand, dust; * |
| Remark |
| — Note regarding classification of environmental conditions acc. to EN 60721 | * The supplied plug covers must remain in place over the unused interfaces during operation! |
| Conformal coating |
| Coatings for printed circuit board assemblies acc. to EN 61086 | Yes; Class 2 for high availability |
| Military testing according to MIL-I-46058C, Amendment 7 | Yes; Discoloration of coating possible during service life |
| Dimensions |
| Width | 72 mm |
| Height | 90 mm |
| Depth | 55 mm |
| last modified: | 03/25/2019 |
