| switching relay with 2 NO, contact for 230V AC 16A control 12V AC |
| Model |
| Product brand name | SENTRON |
| Product designation | Switching relays |
| Design of the product | With 2 NO contacts |
| Design of the switching function | 2 NO |
| General technical data |
| Operating range factor / of control voltage_1 | 0.8 |
| Electrical endurance (switching cycles) | 50 000 |
| Galvanic isolation / between magnet coil and contact | Yes |
| Switching voltage / of the contacts / at AC / minimum | 10 V |
| Switching current / at AC / per contact / minimum | 100 mA |
| Power loss [V∙A] / of magnet coil / with pulse / rated value | 3 V·A |
| Voltage |
| Control voltage / at AC / rated value / maximum | 12 V |
| Surge voltage resistance / rated value | 4 kV |
| Supply voltage | 400 V |
| Supply voltage |
| Type of voltage / of the supply voltage | AC |
| Protection class |
| Protection class IP | IP20, with connected conductors |
| Switching capacity |
| Switching capacity apparent power | |
| for uncompensated fluorescent lamp load | 400 V·A |
| Switching capacity current / at cos phi 0.6 | 16 A |
| Switching capacity active power / with filament lamp load | 1 200 W |
| Dissipation |
| Power loss [W] | |
| for rated value of the current / at AC / in hot operating state / per pole | 1 W |
| at 16 A / per contact / rated value | 1 W |
| of magnet coil / with pulse / rated value | 2.4 W |
| Main circuit |
| Operating frequency / rated value | 50 Hz |
| Operating voltage / at AC / rated value / maximum | 400 V |
| Operating current | |
| rated value | 16 A |
| at cos phi 0.6 ... 1 / rated value | 16 A |
| Control current |
| Type of voltage | |
| of control voltage_1 | AC |
| Control voltage | |
| _1 / initial value | 12 V |
| _1 / Full-scale value | 12 V |
| Control voltage frequency | |
| _1 / initial value | 50 Hz |
| _1 / Full-scale value | 50 Hz |
| Operating range factor / of control voltage_2 | 1.1 |
| Product function |
| Product function / direct operation | Yes |
| Inputs Outputs |
| Relay design | partially electronic |
| Number |
| Number of terminals / with cross-head screw | 1 |
| Number of NC contacts | 0 |
| Number of NO contacts | 2 |
| Number of CO contacts | 0 |
| Connections |
| Connectable conductor cross-section | |
| for flexible conductor / with core end processing | |
| — minimum | 1 mm² |
| — maximum | 6 mm² |
| for rigid conductor | |
| — minimum | 1 mm² |
| — maximum | 6 mm² |
| Mechanical Design |
| Width of opening / of the contacts | 1.2 mm |
| Mounting position | any |
| Installation depth | 90 mm |
| Number of width units | 1 |
| Mounting type | DIN rail |
| Required spacing / for live parts | 6 mm |
| Environmental conditions |
| Ambient temperature | |
| minimum | -10 °C |
| maximum | 40 °C |
