3RX9310-0AA00 AS-INTERFACE POWER SUPPLY UNIT
From SIEMENS
Notice: Phase-out type AS-Interface power supply unit IP20 30 V DC, 2.4 A with integrated ground fault detection | |||
General technical data: | |||
Type of device | AS-Interface power supply unit IP20 | ||
version | with integrated ground-fault detection | ||
input voltage nominal value AC | |||
range 1 | V | 115 | |
range 2 | V | 230 | |
Additional function | integrated ground-fault detection module 3RK1 408-8KE00-0AA2 and connection of the AS-Interface voltage with appropriate wiring | ||
Inputs: | |||
input recommended circuit breaker (IEC 898) in the main supply line | 10 A and higher, characteristic C | ||
input voltage range | |||
voltage range 1 AC | V | 102 ... 132 | |
voltage range 2 AC | V | 195 ... 253 | |
input | |||
Mains buffering time at Ia rated min | 20 ms | ||
line frequency | 50/60 Hz | ||
Mains frequency range | Hz | 47 ... 63 | |
range changeover using | Changeover switch on device | ||
input voltage built-in | T2 | ||
Connections input | spring-loaded terminal connection (0.5 ... 2.5 mm2) | ||
Outputs: | |||
output | |||
DC-voltage controlled floating according to AS-Interface spezification | yes | ||
voltage rated value Ua rated DC | 30 V | ||
tolerance total DC | V | 29.5 ... 31.6 | |
rated current Ia rated | 2.4 A | ||
residual ripple peak-to-peak ( 0-10 kHz, AS-i+/AS-i- ) max | mV | 300 | |
spikes peak-to-peak ( 10-500 kHz, AS-i+/AS-i- ) max | mV | 50 | |
Connections Output | spring-loaded terminal connection (0.5 ... 2.5 mm²) | ||
Efficiency/ heat loss: | |||
Efficiency at Ua rated, Ia rated | % | 85 | |
Protective and monitoring functions: | |||
Output overvoltage protection | no | ||
Current limitation from min. | 2.8 A | ||
Short-circuit protection | yes | ||
Safety related data: | |||
protection class ( EN 60 950/IEC 950 ) | I | ||
Electrical isolation primary/secondary | SELV according to EN 60 950 | ||
Protection class IP | IP20 | ||
Electromagnetic compatibility: | |||
electromagnetic compatibility (EMC) | |||
interference immunity | EN 50 082-2 | ||
emitted interference | EN 50 081-1 | ||
Ambient conditions: | |||
Ambient temperature | |||
during operation | °C | -25 ... +55 | |
during storage | °C | -25 ... +60 | |
humidity rating | max. 80% rel. Humidity | ||
Mounting type | fixing on standard mounting rail DIN EN 50 022-35 x 7.5 mm snap-on | ||
Width | mm | 92 | |
Height | mm | 110 | |
Depth | mm | 136 |