3RK2100-1CT30-0AA3
AS-I K20, 4DO, M8, A/B

From SIEMENS

AS-i compact module K20 digital A/B slave, 4 DQ, IP67 4 x output, 1 A 24 V DC max. 1 A for all outputs 4 x M8 socket
General technical data
Design of the productdigital I/O modules for operation in the field, IP67 - K20
Type4 outputs
Design of the slave typeA/B slave (Spec. 3.0)
I/O configuration7
ID/ID2 codeA/7
Number I/O sockets4
Type of electrical connection of the inputs and outputsM8 screw-type terminals
AS interface total current input max45 mA
operating voltage according to AS-Interface spezification26.5 ... 31.6 V
Ground terminalnot available
Addressingusing M12 female connector
AS interface Connection Polarity reversal protectionbuilt-in
Note 1An external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits. The additional supply must comply with VDE 0106 (PELV), protection class III.
Note 2This module requires a master according to AS-i specifications 3.0
Inputs
Number of digital inputs0
Input circuitPNP transistor
Outputs
Number of digital outputs4
Type of voltage of output voltagesDC
Outputs external power supply 24 V DCshared round cable connection with AS-Interface connection through M12 female connector
Ampacity of the semiconductor output at DC-13 at 24 V1 A
Outputs aggregate current
max2 A
at Tu=40 °C max2 A
Type of switching outputPNP transistor
Design of the pin assignment of the outputsstandard assignement
Outputs socket assignment3 = "-", 2 = output
Property of the output Short-circuit proofYes
Outputs
short-ciruit protectionbuilt-in
induction protectionbuilt-in
watchdogbuilt-in
Status display
display of I/Osyellow LED
display of Uauxgreen LED
display of AS-Interface/diagnosticsgreen/red dual LED
Assignment of data bits
socketPIN 4 = OUT1 (D0)
socket 2PIN 4 = OUT2 (D1)
socket 3PIN 4 = OUT3 (D2)
socket 4PIN 4 = OUT4 (D3)
Ambient conditions
Ambient temperature
during operation-25 ... +70 °C
during storage-40 ... +85 °C
Protection class IPIP67
Mechanical data
Width20 mm
Height108 mm
Depth45 mm
Mounting typeno mounting plate required

External links