| AS-i compact module K60 digital 4 DI, IP67 4 x input, maximum 200 mA 4 x M12 socket Y-II assignment ATEX EX II 3D T60°C IP65X Observe special conditions for safe operation: Suitable protective measures against mechanical damage required. For details, see operating instructions Mounting plate 3RK1901-0CA00 must be ordered separately |
| General technical data |
| Design of the product | digital I/O modules for operation in the field, IP67 - K60 |
| Type | 4 inputs |
| Design of the slave type | standard slave |
| I/O configuration | 0 |
| ID/ID2 code | 1/F |
| Number I/O sockets | 4 |
| Type of electrical connection of the inputs and outputs | M12 screw-type terminals |
| AS interface total current input max | 270 mA |
| operating voltage according to AS-Interface spezification | 26.5 ... 31.6 V |
| Ground terminal | PIN5 of each M12 socket is connected to the grounding wrist strap in the mounting plate using a pin |
| Addressing | front addressing socket |
| Application | Use in Zone 22 hazardous areas according to Classification II 3D (dusty atmosphere, non-conductive dust), resistance to shock: 1 joule Conformance with Directive 94/9/EC (ATEX) is verified through compliance with the standards EN 50281-1-1 und EN 60947-5-2 |
| Delivery note | the modules are delivered without mounting plate |
| Sensor supply |
| Type of voltage supply for power supply | using AS-Interface |
| Input voltage | 20 ... 30 V |
| Property of the sensor supply Short-circuit and overload resistant | Yes |
| Ampacity of the sensor supply for all inputs | |
| at ambient temperature 40 °C | 200 mA |
| Inputs |
| Number of digital inputs | 4 |
| Type of connection | 2- and 3-wire technology |
| Input circuit | PNP transistor |
| Type of voltage of the input voltages | DC |
| Inputs switching level High min | 10 V |
| Input current at digital input | |
| for signal <1> minimum | 6 mA |
| with signal <0> maximum | 1.5 mA |
| Inputs | |
| sensor supply using AS-Interface | short-circuit and overload resistant |
| socket assignment | |
| — PIN 1 | sensor supply L+ |
| — PIN 2 | data input II |
| — PIN 3 | sensor supply L- |
| — PIN 4 | data input I |
| — PIN 5 | ground terminal |
| Design of the pin assignment of the inputs | Y-II assignement |
| Outputs |
| Number of digital outputs | 0 |
| Outputs external power supply 24 V DC | not required |
| Outputs | |
| watchdog | not required |
| Assignment of the data bits |
| Assignment of data bits | |
| socket | PIN 4 = IN1 (D0), PIN 2 = IN2 (D1) |
| socket 2 | PIN 4 = IN2 (D1) |
| socket 3 | PIN 4 = IN3 (D2) , PIN 2 = IN4 (D3) |
| socket 4 | PIN 4 = IN4 (D3) |
| socket 5 | not assigned (closed) |
| socket 6 | not assigned (closed) |
| socket 7 | not assigned (closed) |
| socket 8 | not assigned (closed) |
| Ambient conditions |
| Ambient temperature | |
| during operation | -25 ... +85 °C |
| during storage | -40 ... +85 °C |
| Protection class IP | IP65 |
| Display |
| Status display | |
| display of I/Os | yellow LED |
| display of Uaux | not required |
| display of AS-Interface/diagnostics | green/red LED |
| Mechanical data |
| Width | 60 mm |
| Height | 152 mm |
| Depth | 29 mm |
| Mounting type | standard rail mounting/wall mounting using mounting plate for K60 compact module |
