3RK1200-0CG00-0AA2
AS-INTERFACE MODULE SLIMLINE

From SIEMENS

AS-i SlimLine module Phased-out product !!! For further information, please contact our sales department S22.5 digital 4 DI, IP20 4 x input for 2-wire sensor spring-type terminals Overall width 22.5 mm
General technical data:
Design of the productSlimLine S22.5 - I/O modules for operation in the control cabinet, IP20
Design of the slave typestandard slave
Type4 inputs
I/O configuration0
ID/ID2 code0/F
Protocol is supported AS-interface protocolYes
AS interface total current input maxmA50
operating voltage according to AS-Interface spezificationV26.5 ... 31.6
Addressingfront addressing socket
Type of electrical connection of the inputs and outputsspring-loaded terminals
Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750A
Reference code acc. to DIN EN 61346-2K
noteAn external additional supply (AUX POWER) of 20 to 30 V DC is required for the supply of the output circuits.The additional supply must comply with VDE 0106 (PELV), protection class III.
Note 1detachment tool for spring-loaded terminal connection: See Accessories
Sensor supply:
Type of voltage supply for power supplyusing AS-Interface
Input voltageV20 ... 30
Property of the sensor supply Short-circuit and overload resistantYes
Inputs:
Number of digital inputs4
Type of connection2-wire technology
Input circuitPNP transistor
Type of voltage of the input voltagesDC
Inputs switching level High minV10
Input current at digital input
for signal <1> minimummA5
with signal <0> maximummA1.5
Inputs sensor supply using AS-Interfaceshort-circuit and overload resistant
Outputs:
Number of digital outputs0
Output voltage at DC at 24 VV22 ... 24
Status display
display of I/Osyellow LED
AS-Interfacegreen LED
FAULTred LED
Assignment of data bits
D0IN1
D1IN2
D2IN3
D3IN4
Ambient conditions:
Ambient temperature
during operation°C-25 ... +70
during storage°C-40 ... +85
Protection class IPIP20
Mechanical data:
Widthmm22.5
Heightmm103
Depthmm86
Mounting type35 mm standard rail mounting or wall mounting using push-in lugs
Conductor cross-section
solid2 x (0.25 - 1.5) mm²
finely stranded
— with end sleeve2 x (0.25 - 1) mm²
— without end sleeve2 x (0.25 - 1.5) mm²
AWG solid or strandedAWG 2 x (24 - 16) mm²

External links