4633-177 Motors - M46 FIXED MOTOR
From Eaton
| Feature | Code | Description |
|---|---|---|
| PRODUCT IDENTIFICATION | HHD | HEAVY DUTY HYDROSTATIC FIXED DISPLACEMENT MOTOR |
| DISPLACEMENT | 46 | 75,33 CM3/R [4.594 IN3/R] AT 18 DEG. SWASHPLATE ANGLE |
| TYPE | 3 | FIXED DISPLACEMENT MOTOR |
| DESIGN TYPE | 3 | FIXED CLEARANCE - (MODELS 33-64) |
| OUTPUT SHAFT | 29 | 14 TOOTH 12/24 PITCH SPLINE WITH 3/8-24 UNF X [.75] DP HOLE IN END OF SHAFT (MODELS 33-64) |
| MAIN PORTS | K | REAR PORTS - [1.00] SAE 4-BOLT SPLIT FLANGE PORT, HIGH PRESSURE SERIES (CODE 62) WITH DIAGNOSTIC FITTINGS PER SAE J1502 (U.S. UNITS) |
| END COVER AND COMPOSITE VALVE BLOCK ASSY | G | INTEGRAL SHUTTLE VALVE WITH LOW-RATE SHUTTLE VALVE SPRINGS AND CHARGE PRESSURE RELIEF VALVE |
| CHARGE PRESSURE RELIEF VALVE | 1 | STANDARD |
| CHARGE PRESSURE RELIEF VALVE SETTING | H | 19,3 BAR [280 LBF/IN2] |
| HIGH PRESSURE RELIEF VALVE - PORT A | 0 | NONE |
| HIGH PRESSURE REL VALVE SETTING - PORT A | 0 | NONE |
| HIGH PRESSURE RELIEF VALVE - PORT B | 0 | NONE |
| HIGH PRESSURE REL VALVE SETTING - PORT B | 0 | NONE |
| SPEED SENSOR | 0 | NO SPEED SENSOR |
| SPECIAL FEATURES | 00 | NO SPECIAL FEATURES |
| PAINT AND PACKAGING | A | PAINTED FINISH BLACK |
| IDENTIFICATION ON UNIT | 0 | STANDARD |
| DESIGN CODE | B | B |
